Front cover of the channel letters are made from light diffusing opal acrylic with a metal trim. The trim can be fixed to the front acrylic or it can be produced as L-angle to hold the front acrylic especially for big letters. Front acrylic can be covered with translucent vinyl (Oracal 8500 or Avery 4500 Series) or front acrylic can have various colors (Pantone and RAL colors are possible for acrylic color).

Metal trim and return of the letter are produced from Painted Aluminum, Stainless Steel, Copper, Brass and (Corten) Steel. Stainless steel can have the surface finish matt, brushed or mirror. Paint colors for aluminum can be chosen from RAL Classic and Pantone Solid Coated color swatch. The color options for stainless steel are silver, gold, anthracite and bronze. Default used Stainless Steel is AISI 304 (1.4301). In case of usage near sea side optionally AISI 316 (1.4401) is available. Brass and Copper can be left as natural, or varnished, which is highly recommended against corrosion. Extra treatments like antique look or brush look can be made with matt or glossy varnish after treatment. Rusted look with Corten Steel or standard Steel can be caught with special treatment to surface.

Letters can be produced without LED illumination if desired. Letters have 12V Samsung branded IP67 LEDs and stripe LED is not used. As default channel letters are presented with IP68 Power Supply. Different brands of LED and Power Supply can be supplied upon request. Manuel dimmer or dimmable power supply are available upon request. LEDs used for channel letters are dimmable.

Back of letters are finished with Aluminum or PVC based on the request.

Minimum beam thickness of letters can be 30mm including trim. Minimum depth is 50mm.

The installation is followed by screwing the back plate to wall and then the front body to the back plate.

Based on the request, the letters can be sent mounted on a frame (rail) or aluminum case.